Description
| The kit compromises of laser cut plywood parts for the main body and a set of 3D printed frames to produce the Cleminson system. Additional detailing is achieved by either FDM or Resin printed detailing parts. The running gear is standard Binnie wheels, with steel axles, brass bearings and a set of our resin printed NWNGR goods couplings.
Each part of the kit has been produced by a process that is optimised for that part. The dimensions below are all maximum dimensions, so over couplings for the length and over any detailing parts on the outside for the width. The height is from the top of the rail. Length – 311mm The kit contains everything you need to build the wagon, including our detailed and illustrated instructions. The only thing the kit does not contain is any paints and adhesives. As with all of our kits, this has been designed to be a straight forward kit to build, perfect for beginners. It can be built and assembled as supplied to be a great representation of the NWNGR Cleminson wagons, or it can be “super-detailed” to add even more realism to your model. Decals for these kits can be purchased from Endon Valley Custom Decals. Additional information about these wagons can be found on the Festipedia site here. There are no known images of the full wagon, but half of the wagon is photographed at Bryngwyn in the 1930s. There is an excellent drawing on the Ffestiniog Railway Heritage Group’s Ibase website, which was used to produce this kit. The demonstration model is painted in Rustoleum’s Red Oxide primer, with a coat of Gloss Clear Coat from the same manufacturer. |
